Silo and Tank Painting for Commercial or Industrial Storage Tanks

Commercial painting and Industrial painting contractors.

Specializing in industrial tank and silo painting.

TX NC VA MS AL GA FL TN SC Louisiana

 

We Paint It 4U is in the business of cleaning and coating all types of storage silos. Often this will also involve associated baghouses, piping ladders and hand rails.
 
The silo exteriors are abrasive blasted or aggressively pressure washed with rotating nozzles to a clean, sound surface suitable for coating.

 

Rust resistant primers whether they be epoxy or alkyd, are applied to assure corrosion resistance. Finish coats are formulated with polyurethane, for durability, color fastness, and gloss retention.  Unless the customer has requested specific products; which are often inferior to our preferred Sherwin Williams Marine and Industrial Coatings, we apply Macropoxy 646 and Hi-Solids Polyurethane.
 
When coating the exteriors of tanks and silos; whether commercially or in an industrial setting, space is always limited.  Our preferred method of access for the interiors or exteriors of tanks is the Spider ST-26 seen below.
shows how to access the side of a silo in Hattiesburg MS for the purpose of painting
method of access to interior tank

If you are interested in our painting and coating services or you would like to request additional information, please contact us through the form on the “Email Mike” tab or call me directly.

Call Mike at 334-648-4448

Coatings rather than paint is usually the preferred term when the conversation is about silos and tanks.  Tank linings refer to specialized coatings used on the interiors of vessels.

 

These coatings provide corrosion resistance and can be highly specialized. Tank linings vary based on whether the products are dry or wet, hot or cold or even regulated by the FDA.  Surface preparation is higher for these coating than many others.

 

Abrasive blasting commonly called sandblasting is accomplished at different pressures and medias based on the situations.  Our preferences are garnet, glass and coal slag.

 

USDA, FDA, and other regulations are strictly followed.
Storage tank Sand Blasting and Painting

If you are interested in our painting and coating services or you would like to request additional information, please contact us through the form on the “Email Mike” tab or call me directly.

Call Mike at 334-648-4448